Sharp AQUOS 10P03-MX-NM - Manual (Page 18)

16
Connecting a PC
Refer to page 48 for a list of PC signals compatible with the TV.
■ When using HDMI cable (INPUT 4, 5, 6 or 7):
HDMI OUT
Back panel
vertical inputs
HDMI-certified cable
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable to
the INPUT 4 (HDMI) terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to
"HDMI+Analog". (See page 48.)
• The HDMI terminals only support digital signal.
■ When using DVI-HDMI conversion cable (INPUT 4):
DVI OUT
AUDIO
Back panel
vertical inputs
DVI-HDMI conversion cable
Ø 3.5 mm stereo minijack cable
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the INPUT 4 (HDMI) terminal, connect a Ø 3.5 mm stereo minijack cable to the
AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 48.)
■ When using analog RGB cable (INPUT 3):
AUDIO RGB
Ø 3.5 mm stereo minijack cable
Analog RGB cable
(D-sub 15-pin cable or VGA cable)
Back panel
vertical inputs
• When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of INPUT 3.
• When connecting a PC to the INPUT 3, set "Audio Select" to "Video+Audio". (See page 48.)
Connecting to External Equipment