Star Micronics Line Thermal/Dot Printer - Manual (Page 11)

Rev. 0.00
2-5 STAR LIne Mode Command Specifications
• Mark Commands
Class Commands Name
Thermal Slip, Validation
Mark Commands ESC GS * 0 Print mark -
ESC GS * 1 Specify mark height and line feed -
ESC GS * 2 At each mark number
Specify mark color, mark horizontal
width
-
ESC GS * W Register mark format to non-
volatile memory
-
ESC GS * C Initialize mark format from non-
volatile memory
-
• Auto Logo Commands
Class Commands Name
Thermal Slip, Validation
Auto Logo
Commands
ESC GS / W Register Auto Logo setting to non-
volatile memory
-
ESC GS / C Initialize Auto Logo setting from
non-volatile memory
-
ESC GS / 1 Set ON/OFF for Auto Logo function -
ESC GS / 2 Set command characters -
ESC GS / 3 Set user macro 1 -
ESC GS / 4 Set user macro 2 -
ESC GS / 5 Set command character switching
method
-
ESC GS / 6 Set partial cut just prior to Auto
Logo printing
-
• PDF417 Commands
Class Commands Name
Thermal Slip, Validation
PDF417
Commands
ESC GS x S 0
Set PDF417 bar code size -
ESC GS x S 1 Set PDF417 ECC (security level) -
ESC GS x S 2 Set PDF417 module x direction
size
-
ESC GS x S 3 Set PDF417 module aspect ratio -
ESC GS x D Set PDF417 bar code data -
ESC GS x P Print PDF417 bar code -
ESC GS x I Get PDF417 bar code expansion
information
←
• Print Start Trigger Control Commands
Class Commands Name
Thermal Slip, Validation
Print starting
trigger
ESC GS g 0
Print starting trigger -
ESC GS g 1 Set print start timer -
• QR Code Commands
Class Commands Name
Thermal Slip, Validation
QR Code ESC GS y S 0 Set QR code model -
ESC GS y S 1 Set QR code mistake correction level -
ESC GS y S 2 Set QR code cell size -
ESC GS y D 1 Set QR code data (auto setting) -
ESC GS y D 2 Set QR code data (manual setting) -
ESC GS y P Print QR code -
ESC GS y I Get QR code expansion
information
←