Stamina Products Magnetic Upright Exercise Bike 15-5325 - Manual (Page 11)

SET UP INSTRUCTIONS
Place the Magnetic Upright 5325 Bike in the area where it will be used. It is recommended that the
Magnetic Upright 5325 Bike be placed on an equipment mat. The Magnetic Upright 5325 Bike is
approximately 38 1/2 inches long x 22 inches wide x 52 inches tall. An area 4 feet wide x 5 feet long is
required for safe operation of the Magnetic Upright 5325 Bike. Make sure that adequate space is available
for access to and passage around the Magnetic Upright 5325 Bike.
Adjust the LEVELING CAPS(46) on the REAR STABILIZER(3) so that the Bike sits on the
floor without rocking.
The Magnetic Upright 5325 Bike has a pair of WHEELS(45) on the FRONT STABILIZER(2).
Grasp on the HANDLEBAR(5) and tip the Magnetic Upright 5325 Bike forward to move.
LEVELING:
MOVING:
11
FUNCTION INSPECTION:
Visually inspect the Magnetic Upright 5325 Bike to verify that assembly is as shown in the above illustration.
Check the function of the Magnetic Upright 5325 Bike by turning the crank slowly through one complete
revolution to verify that the drive train functions properly. Adjust the TENSION KNOB(25) and verify that it
functions properly.
Locate and read the WARNING LABEL(70) on the Magnetic Upright 5325 Bike. Make sure
that all users read the WARNING LABEL(70). CAUTION: