Steamfast PORTABLE POWER STEAM CLEANER SF-246 User Manual

Page 12

Advertising
background image

12

Top Innovations

U

SING THE

P

ORTABLE

P

OWER

S

TEAM

C

LEANER

OPERATING THE PORTABLE POWER STEAM CLEANER

NOTE: Be sure that Boiler has already been filled and that all desired accessories are

connected before following these steps.

1. Plug power cord into a convenient electrical outlet. Heating Indicator Light will immediately

illuminate, indicating that unit is powered on and Boiler is heating.
CAUTION: This unit uses a grounded (3-prong) electrical plug. Use only in properly

installed 3-prong electrical outlets. Do not attempt to alter plug or circumvent this safety

feature in any way.

2. After approximately 6 minutes, Heating Indicator Light will deactivate. This indicates that Boiler

is heated and unit is ready to begin steaming.

3. Direct Main Steam Nozzle (and connected accessories) towards surface you wish to steam, and

press Steam Trigger. To sanitize surfaces, point Nozzle, press Trigger and hold approximately

1/2 inch from surface for at least 5 seconds. This will insure that you have killed germs and

bacteria.
CAUTION: Always be sure that Main Steam Nozzle and other accessories are pointed in a

safe direction (away from yourself, other people, pets, and plants) before pressing Steam

Trigger.

4. Keep Steam Trigger depressed for a continuous flow of steam. You may also slide the Steam

Lock Switch backward while depressing the Trigger to lock it down (FIGURE 8). This will allow

a continuous flow of steam without holding the Trigger manually.

5. Using a slight back-and-forth motion over the area you are steaming will further enhance the

cleaning process. Wipe steamed areas with a clean cloth to remove loosened dirt and grime.
CAUTION: Wiping the area while it is still wet is recommended, but use care when wiping

surfaces such as metal that may still be hot.
NOTE: During use, the Heating Indicator Light may illuminate, accompanied by a slight

drop in steam pressure. This is normal.

6. Once steaming tasks are complete, immediately unplug power cord from electrical outlet. Refer

to Page 13 of this manual for cleaning and proper storage guidelines.

FIGURE 8

Advertising