Important safety instructions, Save these instructions, For household use only – Steamfast PORTABLE POWER STEAM CLEANER SF-246 User Manual

Page 4

Advertising
background image

4

Top Innovations

SAVE THESE INSTRUCTIONS!

FOR HOUSEHOLD USE ONLY

IMPORTANT SAFETY INSTRUCTIONS

11. If Heating Indicator Light does not illuminate when power cord is plugged in, unit is not

operating normally. Immediately turn unit off and disconnect from power supply, then refer to

troubleshooting guide on Page 14 of this manual for assistance.

12. Always unplug power cord when unit is not in use.

13. Do not use unit outdoors or operate where aerosol (spray) products are being used, or where

oxygen is being administered.

14. Unit is only meant to be used with recommended SF-246 accessories. Using other types of

attachments may cause damage to unit or injury.

15. When filling Boiler, only distilled or de-mineralized water should be used in unit, in order

to minimize potential build-up of mineral deposits. Other cleaning agents could damage unit or

cause injury. Do not overfill unit.

16. Do not attempt to use steam without first properly filling Boiler.

17. To reduce risk of contact with hot water emitting from steam vents, check appliance before each

use by holding Main Steam Nozzle away from body and pressing Steam Trigger. Do not

operate unit if steam vents are blocked.

18. Burns can occur from touching hot metal parts, hot water, or steam. Do not touch Main Steam

Nozzle or attempt to connect or remove attachments while unit is in use. Do not turn unit

upside-down - it may contain hot water.

19. When steaming any surface or item for the first time, it is recommended that you consult the

manufacturer’s guidelines for material being steamed. For surfaces/items in question, test on an

inconspicuous area before proceeding.

20. Do not allow power cord to touch hot surfaces during use. Wrap cord loosely around unit when

storing.

21. To avoid burns from escaping steam when removing Boiler Cap to refill unit:

• Always allow unit to cool for 5-10 minutes.

• Press and hold Steam Trigger to release all remaining steam.

22. Always allow Portable Power Steam Cleaner to cool completely (at least 30 minutes) before

cleaning or storing.

Use of this appliance for anything other than its intended purposes as specified in this

manual may result in voidance of the warranty.

Advertising