Stewart Filmscreen Corp AVS-1005 - Manual (Page 5)

Note: This manual refers to “AC” to represent electrical power. Your
location may use 120 V, 220 V or other electrical power. Screen systems
are manufactured using the electrical power type specified for the location.
Use appropriate power sources for your location.
Preparation
Specifications regarding the individual screen dimensions, weight, mounting,
and controls are provided by the factory when the unit is ordered. Before
beginning the installation:
‹ Check the specifications for any options.
‹ Prepare the location for the AC power.
‹ Ensure site has clearance for the screen when it is fully extended,
and that there are no obstructions in its path.
‹ Check the size and weight of the screen to be installed so that
you can plan for the number of people required to move it. You
need at least two people for the smaller screens; more are
needed for larger, heavier screens.
You will need:
‹ A level
‹ Electrician tools for connecting the low-voltage control switch.
Automatic Vertical Screen: Owner’s Manual 3
P
REPARING THE
I
NSTALLATION