SECO-LARM USA Electromagnetic Lock E-941SA-1200 - Manual (Page 3)

SECO-LARM ELECTROMAGNETIC LOCK
SECO-LARM U.S.A., Inc. 3
“L”-Bracket and
“Z”-Bracket
Short self-
tapping screws
Electromagnet
Mounting plate
Sexnut bolt
Door spacer
Armature screw
Tamper caps
Overview:
Installation Applications:
Long self-
tapping screws
Armature plate
Guide pins
Rubber washer
Steel washers
Hex-head
mounting screws
NOTE: When mounting the electromagnet, it may be necessary to use a “Z”-bracket, 1 or 2 “L”-brackets,
and/or plate spacers, depending on the location and the type of door and frame. Use the diagram below to
help decide whether or not an optional bracket will be necessary for installation.
See page 7 for a complete list of SECO-LARM accessories.
.
“L” Bracket
Typical
Installation
“U” Bracket
(Typically for glass doors)
Plate
Spacers
Armature-
Mounting Plate