SSS AF9 - Manual (Page 4)

should be used only until a properly
grounded outlet (B) can be installed by a
qualified electrician. The green colored
rigid ear, lug, or the like (F) extending from
the adapter must be connected to a per-
manent ground (G) such as a properly
grounded outlet box cover. Whenever the
adapter is used, it must be held in place
by a metal screw.
Note: In Canada, the use of a tempo-
rary adapter is not permitted by the
Canadian Electrical Code.
electrician or service person if you are in
doubt as to whether the outlet is properly
grounded. Do not modify the plug provid-
ed with the appliance - if it will not fit the
outlet have a proper outlet installed by a
qualified electrician. This appliance is for
use on a nominal 120 volt circuit and has a
grounding plug that looks like the plug
illustrated in sketch (A).
A temporary adapter (D) may be
used to connect this plug to a 2-pole
receptacle (E) if a property grounded outlet
is not available. The temporary adapter
4
12
13 14
14
Cleaner description
How to use
The assembled cleaner will
look like the drawing.
1. Handle
2. Cord hooks: wrap cord around
hooks for storage. The top hook can
be rotated right or left for easy cord
release.
3. Hose
4. ON/OFF Switch: located on left
rear corner of cleaner body.
5. Carrying handle
6. Bag door
7. Stair cleaning handle: located
on lower edge of bag door.
8. Handle release lever: step on
lever to lower to operating or low
positions.
9. Headlight
10. Nozzle control knob: slide
knob to correct setting for height of
carpet being cleaned.
11. Furniture guard: helps prevent
cleaner from marking furniture.
12. Edge groomers
13. Wands
14. Final exhaust filter
15. Dusting brush
16. Crevice wand:
stores inside of
extension wand.
17. Furniture nozzle
18. Hose hook
1
2
2
2
3
4 5
6
7
9
10
11
12
17
18
14
15
16
Operate cleaner only at voltage
specified on data plate on bottom
of cleaner.
WARNING: Electric shock could
occur if used outdoors or on wet
surfaces
Grounding instructions
This appliance must be grounded. If
it should malfunction or breakdown,
grounding provides a path of least
resistance for electrical current to reduce
the risk of electric shock. This appliance is
equipped with a cord having an equip-
ment-grounding conductor (C) and
grounding plug (A). The plug must be
plugged into an appropriate outlet (B) that
is properly installed and grounded in
accordance with all local codes and ordi-
nances.
DANGER –
Improper connection of the equipment-
grounding conductor can result in the risk
of electric shock. Check with a qualified
C
F
G
A
B
D
E
13
13
12
8