Sony CDP-D12 - Manual (Page 37)

37
Display Messages/Last Mode Memory
Table of display messages
The following table shows the various messages that appear in the display and their meanings.
Message Meaning
No Disc No CD is inserted.
Disc Error An error occurred during loading or ejection of the CD.
An error occurred during reading of the CD.
Play was interrupted due to a defect in the CD.
OVER The end of the disc was reached as you pressed the M button while searching for a particular track
position.
Timer Play The time specified by Timer-activated Play has arrived and the CD player has started playing.
XX t Not PRG* During Program Play, an attempt was made to cue to a track not contained in the program.
Not Changed Rehearsal play was canceled without any adjustment made to the cue point.
Program Full An attempt was made to program a 100th track.
Time Full An attempt was made to program tracks totaling more than 888 minutes of playing time.
CDP-D12 A CD is being loaded.
Welcome The loaded CD is being read.
Remote ON Control of the player by a control device connected to the CD player has begun.
Remote OFF Control of the player by a control device connected to the CD player has ended.
Remote An attempt was made to operate the CD player while a control device was controlling the player.
* “XX” indicates a track number.
Last mode memory
After playback finishes, after taking out the CD, and even after turning off the power, the player memorizes
various settings. The following table shows the relationship between the settings that the player memorizes and
the status of the player.
Setting that the player memorizes
After playback
finishes After taking
out the CD After turning
off the power
Play mode (normal playback/Program Play/Shuffle Play) Yes Yes Yes
Repeat play mode 1) Yes Yes Yes
Selection of Auto Cue or Auto Pause Yes Yes Yes
Vari Speed Play Yes Yes Yes
Sound output setting for search function Yes Yes Yes
The contents of the program Yes No Yes 2)
Marked point Yes No No
Start point and end point of A-B Repeat Play No No No
Music Scan No No No
Lock/unlock status of the A EJECT button. Yes Yes Yes
Timer-activated playback Yes Yes Yes
Threshold level setting for Auto Cue Yes Yes Yes
Scanning time of each track for Music Scan Yes Yes Yes
User settings for the PARALLEL connector Yes Yes Yes
1) Repeat All Play or Repeat 1 Play only.
2) When the player is turned off while the CD is still loaded, only the first 24 tracks of the program are memorized.