Sony CDP-D12 - Manual (Page 39)

Specifications
System
Frequency response
20 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 98 dB
Harmonic distortion
Less than 0.006%
Channel separation
More than 87 dB (1 kHz)
Analog output
ANALOG OUT (BAL)
Terminal type XLR-3-32 (male)
Maximum output level
+10/+24 dBu (selectable) (0 dBu =
0.775 Vrms)
Load impedance More than 600
Ω
ANALOG OUT (UNBAL)
Terminal type Phono jack
Maximum output level
+8 dBu (0 dBu = 0.775 Vrms)
Load impedance More than 10 k
Ω
PHONES
Terminal type Stereo phone jack
Maximum output level
0 to 10 mW
Load impedance 32
Ω
Digital output
DIGITAL OUT OPTICAL
Terminal type Optical connector
DIGITAL OUT COAXIAL
Terminal type Phono jack
Load impedance 75
Ω
General
Power requirements
Model for Europe: 230 V AC, 50/
60 Hz
Model for the U.S.A and Canada:
120 V AC, 60 Hz
Power consumption
Model for Europe: 16 W
Model for the U.S.A and Canada:
18 W
Peak inrush current
(1) Power ON, current probe
method: 1 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
1 A (230 V)
Dimensions 482
Ч
44
Ч
285 mm (19
Ч
1 3 /
4
Ч
11
1 /
4
in.) (w/h/d) (approx.)
Mass 4.0 kg (8 lb. 13 oz.) (approx.)
Operating temperature
0˚C to +40˚C (32˚F to 104˚F)
Storage temperature
–20˚C to +60˚C (–4˚F to +140˚F)
Supplied accessories
Remote controller (1)
R6 (size-AA) batteries (2)
Control S connecting cable (1)
CD-ROM (1)
Warranty booklet (1)
Design and specifications are subject to change
without notice.
Unit: mm
Sony Corporation