Samsung Digimax V10 - Manual (Page 37)

37
Self-timer( ) / Remote ( )/ Right button
When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor
shift to the right tab. The right button can also be used to move to a sub menu to select a
different setting.
When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-
timer ( ) and Remote ( ) button. This function is used when the photographer would
also like to be in the image.
Using the self-timer and remote control.
1. Rotate the mode dial to the RECORDING mode.
2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD
monitor. A self-timer icon or remote control icon appears on the LCD monitor.
- Selecting a self-timer : When you press the SHUTTER button, the picture will be
taken after the specified time has elapsed and the self-timer
function will be canceled.
- Selecting a remote mode : Pressing the shutter button of remote control will allow an
interval of 2 seconds before the image is taken. In the remote
mode, the shutter button of the camera can’t be activated. After
taking a picture, the remote mode will be maintained. But,
pressing the power button, rotating the mode dial, pressing the
play mode button and pressing the self-timer button will cancel
the remote mode.
[Selecting the 2 SEC self-timer] [Selecting the remote control]
Description of Self-timer/Remote mode
Icon Mode Description
Pressing the shutter button will allow an interval of 2 seconds
before the image is taken.
Pressing the shutter button will allow an interval of 10 seconds
before the image is taken.
A picture will be taken after about 10 seconds and 2 seconds
later a second picture will be taken.
You can take a picture by remote control instead of using the
shutter button of the camera.
Double
Remote
mode
2s
10s