Samsung Digimax V10 - Manual (Page 52)

52
Continuous shot
You can select continuous shot, AEB (Auto Exposure Bracketing) and AFB (Auto Focus
Bracketing). If you select CONTINUOUS, AEB or AFB, the flash will automatically be set to
Flash Off.
[Single]: Take one picture only
[Continuous]: Images will be taken continuously until the
shutter button is released. The shooting
capacity depends on the memory.
If less than 3 pictures are available in the memory, the Sequential and the AEB, AFB
shooting are not available.
If you select 3072X2304 or 2816X2112 image size, the maximum numbers of continuous
shot are 3.
It is best to use a triangular support for the AEB shooting for saving time is long and hand
shaking may occur.
If the [TIFF] or [S. Fine] quality is selected and the [Shooting] sub menu is changed to
[Continuous], [AEB] or [AFB], the image quality is changed to the [Fine] sub menu
automatically.
The self-timer can’t be activated during the continuous shooting.
INFORMATION
[ PROGRAM mode ]
Shooting
Single
Continuous
AEB
AFB
[AEB]: You can select the exposure bracket range
( 0.3EV step, 6 steps) by rotating the jog dial.
Three pictures are taken in a series in different
exposure value. Use this menu if it is hard to decide
exposure of the object.
[AFB]: You can select the focus bracket range( 1 step, 3
steps) by rotating the jog dial. Three pictures are
taken in a series in different focus range. Use this
menu if it is hard to decide distance of the object.
NOR
Shooting
NOR
Shooting
NOR
Single
Continuous
AEB
AFB
Single
Continuous
AEB
AFB