SpectronIQ PD-3000HD - Manual (Page 13)

Connecting to Other Devices
5
Connecting to an Audio System
There are several different outputs that can be used to connect to an external audio system,
analog and digital.
To connect to an audio system using 5.1 channel
analog audio:
Use six RCA cables to connect the 5.1 channel audio jacks
on the rear of the player (FL—front left, FR—front right,
SL—side left, SR—side right, CEN—center, and SUB—
subwoofer) to the corresponding inputs on the audio
system.
To connect to an audio system using stereo analog
audio:
Use two RCA cables to connect the front left (FL) and
front right (FR) audio jacks on the rear of the player to a
stereo input on the audio system.
To connect to an audio system using coaxial digital
audio:
1. Use a digital coaxial cable to connect the COAXIAL
output on the player to a coaxial S/PDIF audio input
on the audio system.
2. Select the appropriate Digital Output setting under
the Audio setup menu on the player (see
“Configuring the Player” on page 20).
To connect to an audio system using optical digital
audio:
1. Use a TOSLINK™ cable to connect the OPTICAL
output on the player to an optical S/PDIF audio input
on the audio system.
2. Select the appropriate Digital Output setting under
the Audio setup menu on the player (see
“Configuring the Player” on page 20).
OPTICAL OUTPUT
CLASS 1
LASER PRODUCT FL SL CEN VIDEO Pr/Cr Y
FR SR SUB S-VIDEO Pb/Cb COAXIAL HDMI
CAUTION
FL
SL
CEN
FR
SR
SUB
AUDIO SYSTEM
5.1 CHANNEL
AUDIO INPUT
OPTICAL OUTPUT
CLASS 1
LASER PRO FL SL CEN VIDEO Pr/Cr Y
FR SR SUB S-VIDEO Pb/Cb COAXIAL HDMI
CAUT
R
L
AUDIO SYSTEM
STEREO
AUDIO INPUT
OPTICAL OUTPUT
CLASS 1
LASER PRODUCT FL SL CEN VIDEO Pr/Cr Y
FR SR SUB S-VIDEO Pb/Cb COAXIAL HDMI
CAUTION
AUDIO SYSTEM
COAXIAL DIGITAL
AUDIO INPUT
OPTICAL OUTPUT
CLASS 1
LASER PRODUCT FL SL CEN VIDEO Pr/Cr Y
FR SR SUB S-VIDEO Pb/Cb COAXIAL HDMI
CAUTION
AUDIO SYSTEM
OPTICAL DIGITAL
AUDIO INPUT
OMPD3000HD.book Page 5 Tuesday, September 5, 2006 9:08 PM