SpectronIQ PD-3000HD - Manual (Page 32)

24
Troubleshooting
Symptom Possible Cause Resolution
Power does not
come on Power cord not
securely connected Make sure the power cable is firmly inserted into the
wall outlet.
Power outlet is off or
not working Try plugging a different device into the outlet and
see if it turns on. If not, check that the outlet is on or
use a different outlet.
Player main power is
off Ensure the power button on the player itself is on.
No picture Player is off Press the power button on the player to turn the
player on. Then, if needed, press the power button
on the remote.
No signal Make sure the proper source is selected on the
external display. If there is still no picture, check the
signal cable(s) and ensure the player is on and
working.
Display is too dark
or too bright Contrast or
brightness too low
or too high Adjust the contrast and/or brightness to desired
setting on the display.
Distorted image Display format set
incorrectly Check that the correct display format is selected in
the Setup menu (see “Video” on page 21).
Unclear or noisy
picture Signal cable(s) not
securely connected Make sure the signal cable(s) are firmly connected.
Radio interference Check for any electronic devices nearby that might
be interfering with the video signal or the player’s
operation.
No sound Audio cable(s) not
securely connected Make sure the audio signal cable(s) are firmly
connected.
Audio muted Unmute the audio by pressing the MUTE button on
the remote.
Audio settings set
incorrectly Check the audio settings in the Setup menu (see
“Audio” on page 22).
Distorted sound Audio settings set
incorrectly Check the audio settings in the Setup menu (see
“Audio” on page 22).
Audio cable(s) not
securely connected Make sure the audio signal cable(s) are firmly
connected.
OMPD3000HD.book Page 24 Tuesday, September 5, 2006 9:08 PM