Samsung DVD-V85 - Manual (Page 13)

Setting the DVD-VCR Output Channel
Selecting the RF OUT Sound Mode (B/G-D/K)
(Newzealand Model only)
24 25
GB GB
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , ❷ buttons to select the Install
option.
3 Press the OK or ❿ buttons to select this option.
Result: The Install menu is displayed.
4 Press the corresponding or ❷ buttons, until the Manual
Setup option is selected.
5 Press the OK or ❿ button to select this option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or ❷ buttons, until the required preset
TV programme is selected.
Result:
The selected station is displayed at the same time on
the television screen.
7 To change the programme number assigned to a station press the
OK button on the remote control. (For example, To move a TV
station in programme 1 to programme 3)
8 Press the or ❷ buttons to select required position.
And then press OK again to swap the position.
9 On completion, press the RETURN button four times to exit the
menu.
VCR
VCR
Changing the Preset Station Table
VCR
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , ❷ buttons to select the Install
option.
3 Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
4 Press the or ❷ buttons, until the VCR Output CH option is
selected.
5 Select the required output channel (CH21~CH69) by pressing the
OK or
❿ buttons (Australia:CH28 ~ CH69).
CH28 . . CH38 . . CH69
CH21 . . CH36 . . CH69
6 On completion, press RETURN to exit the menu.
Then tune your television again (see page 16).
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
Install
TV System : G
VCR Output CH : CH 36
PR CH NAME
1 21
2
3
4
5
- - - -
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR
RETURN
PR CH NAME
1
2
3 21
4
5
- - - -
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR
RETURN
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , ❷ buttons to select the Install
option.
3 Press the OK button to select this option.
Result:
The Install menu is displayed.
4 Press the or ❷ buttons, until the TV System option is
selected.
5 Press the ➛ or ❿ button to select G or K.
6 On completion, press RETURN to exit the menu.
G
K
Auto Setup
Manual Setup
Install
TV System : G
VCR Output CH : CH 36
Auto Setup
Manual Setup
Install
VCR Output CH : CH 38
Australia Model
Newzealand Model
Auto Setup
Manual Setup
TV System : G
VCR Output CH : CH 36
Install
Auto Setup
Manual Setup
VCR Output CH : CH 38
Install
Australia Model
Newzealand Model
CH:28
:
CH:38
:
CH:69
CH:21
:
CH:36
:
CH:69
(Australia Model)
(Newzealand Model)