Samsung DVD-V85 - Manual (Page 19)

36 37
GB GB
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛
Before presetting a recording, check that the date and
time are correct.
1 Insert the cassette and press TIMER on the remote control.
Result:
The TIMER PROGRAMMING menu is displayed.
2 Press ❿ to select the input source.
3 Select the required station by pressing the , ❷ buttons or
INPUT SEL. to select the LINE1, LINE2 input sources.
4 Press ❿ to select the recording day.
5 Select the required day by pressing the or ❷ buttons.
6 Press ❿ to select the recording start time.
7 Select the required hour value by pressing the or ❷ buttons.
8 Press ❿ to select the minutes.
9 Select the required minute value by pressing the or ❷ buttons.
10 Press ❿ to select the recording stop time.
11 Select the required recording stop time by pressing the or ❷
buttons, following the same procedure as when selecting the
recording start time.
12 Press ❿ to select the recording speed.
13 Press the or ❷ buttons to select the SP (Standard Play), LP
(Long Play), Auto (Auto Tape Speed Select) recording speeds.
14 When you have finished, press the RETURN button.
15 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
➢
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
Using the Timer Programming Feature
OPEN/CLOSE STANDBY/ON
15
Standard
G-Code
Timer Method
Modifying G-CODE Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press M
ENU a second time to confirm.
If you wish to... Then...
Select an input source other ◆ Press the ➛ or ❿ buttons, until the PR selection flashes.
than the tuner (LINE IN 1 or LINE IN 2) ◆ Press the INPUT SEL. button one or more times to change the
input source selection.
Result:
The programme number is replaced by:
• The LINE IN 1 or LINE IN 2 source using the
INPUT SEL. button for a satellite tuner or
external video source
➢
The input source must be selected before changing any
other value.
Record a programme every day ◆ Press the ➛ or ❿ buttons, until the DAY selection flashes.
(Monday to Sunday) at the same time ◆ Press the or ❷ buttons, until the DLY (Daily) value is
displayed.
Record a programme every week ◆ Press the ➛ or ❿ buttons, until the DAY selection flashes.
on the same day and at the same time ◆ Press the or ❷ buttons, until the W- (Week) value is
displayed, followed by the required day.
Example:
W-SA (Weekly Saturday)
Extend the recording time ◆ Press the ➛ or ❿ buttons, until the STOP selection flashes.
◆ Press the or ❷ buttons to increase or decrease the stop
time.
Select the recording speed ◆ Press the ➛ or ❿ buttons, until the recording speed selection
flashes.
◆ Press the or ❷ buttons until the correct indication is
displayed:
•
AUTO (Auto Tape Speed Select) : see page 37
• SP (Standard Play)
• LP (Long Play)
VCR VCR