Sony MHC-W550 - Manual (Page 11)

Basic Operations
11
To
Stop playback
Pause
Select a track
Find a point in
a track
Select a CD
in stop mode
Play only the
CD you have
selected
Play all CDs
Remove the CD
Exchange other
CDs while
playing
Adjust the
volume
Tips
• Pressing ·P when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
·P or one of the DISC 1~3 buttons (Automatic
Source Selection).
• If there is no CD in the player, “CD NO DISC”
appears in the display.
• When a disc tray is selected or the CD placed on
that tray is playing, the DISC 1~3 button for the
respective tray lights green.
Do this
Press p (p on the remote).
Press ·P (P on the remote).
Press again to resume
playback.
During playback or pause,
turn the jog dial clockwise (to
go forward) or
counterclockwise (to go back)
and release it when you reach
the desired track. Or press
+ (to go forward) or =
(to go back) on the remote.
Press and hold down ) or
0 (or )/0 on the
remote) during playback and
release it at the desired point.
Press one of the DISC 1~3
buttons or DISC SKIP
EX-CHANGE.
Press 1/ALL DISCS
repeatedly until “1 DISC”
appears.
Press 1/ALL DISCS
repeatedly until “ALL DISCS”
appears.
Press 6 OPEN/CLOSE.
Press DISC SKIP
EX-CHANGE.
Turn VOLUME (or press VOL
+/– on the remote).