Sony MHC-W550 - Manual (Page 17)

Basic Operations
17
Recording from a
tape
— High-speed Dubbing
4
Press PAUSE P.
Dubbing starts.
To stop dubbing
Press π on deck A or B.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION MODE to a when the
tapes you use have different lengths, the tape in
each deck reverses independently. If you select
RELAY, the tapes in both decks reverse together.
• You don’t have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
Note
Dolby NR and DIRECTION MODE ( a or
RELAY) is off when the mains AC power supply is
switched off.
You can use TYPE I (normal) or TYPE II
(CrO
2 ) tapes. The recording level is
automatically adjusted.
1
Press § and insert a recorded tape
in deck A and a blank tape in deck
B.
2
Press HI-SPEED DUBBING.
Deck B stands by for recording.
3
Press DIRECTION MODE
repeatedly to select
A to record on
one side. Select a (or RELAY) to
record on both sides.
1 4 2 3
ª AUTO REVERSE ·S E
With the side
you want to
play/record
facing forward
2 1 3
π DOLBY
NR
π
POWER
1