Sennheiser EK 500 G2 - Manual (Page 17)

17
Overview of menus
Working with the operating menu
By way of example of the “ TUNE ” menu, this section
describes how to use the operating menu.
After switching the receiver on, the standard display is
shown on the display panel.
Getting into the operating menu
̈
Press the SET button to get from the standard display
into the operating menu. The last selected menu flashes
on the display.
Selecting a menu
̈
Press the
̆
/
̄
rocker button to select a menu.
Display Function of the menu
BANK Switching between channel banks
CHAN Switching between the channels in a channel
bank
TUNE Setting a receiving frequency for the channel
bank “U” (user bank)
SCAN Scanning the channel banks for free channels
AF O UT Adjusting the audio output lev el
SQELCH Adjusting the squelch threshold
DISPLY Selecting the standard display
NAME Entering a name
RESET Loading the factory-preset default settings
PILOT Activating/deactivating the pilot tone
evaluation
LOCK Activating/deactivating the lock mode
EXIT Exiting the operating menu and returning to the
standard display