Indications and displays, Lc display panel, Indications and displays of the receiver – Sennheiser EK 500 G2 User Manual
Page 8: Operation and battery status indication
8
Indications and displays
LC display panel
ቢ
Alphanumeric display
ባ
“B.CH“ – appears when the channel bank and
the channel number are displayed
ቤ
“MHz“ – appears when the frequency is displayed
ብ
4-step battery status display
ቦ
Lock mode icon
(lock mode is activated)
ቧ
“PILOT” display
(pilot tone evaluation is activated)
ቨ
“MUTE” display
(audio output is muted)
ቩ
7-step level display for received audio signal “AF”
ቪ
7-step level display for received RF signal “RF”
Indications and displays of the receiver
When used together with an ew 500 G2 transmitter, the
receiver provides information on its operating states and
those of the received transmitter (remote displays).
Operation and battery status indication
The red LED (LO W BAT/ON)
ᕣ
provides information on the
current operating state of the receiver:
Red LED lit up:
The receiver is switched on and the
capacity of the batteries/BA 2015
accupack is sufficient.
Red
LED
flashing:
The batteries are/the BA 2015
accupack is going flat (LOW BAT)!
ቢ
ብ
ቦ
ቧ
ቨ
ቩ ቪ
ባ
ቤ
»
ብ