Silvercrest KH 2380 - Manual (Page 13)

13 GB/IE
cable for 12 V DC ignition current of the vehicle.
In this manner the car radio and an electric
aerial can only use current from the vehicle
when the ignition is switched on.
• Connect the cable for the vehicle’s minus/
ground connection plug-in fp with the help of
a biscuit connector with the car’s connection
cable for the minus pole (battery’s minus pole
which by standard is connected with the car’s
chassis).
L Connection with CD Changer
Tip! Use a connecting cable with DIN 8-pole plug.
A standard CD changer with DIN 8-pole connector
can be connected to the device.
• Install the connecting cable with the DIN 8-pole
plug in accordance with its operation manual
in the car.
• Guide the connecting cable with the DIN 8-pole
plug to the CD changer and carefully out of the
front of the DIN assembly bracket.
• Insert the DIN 8-pole plug of the connecting cable
until it catches into the DIN 8-pole plug jack
AUX
fq to the rear of the casing.
• Insert the DIN 8-pole plug to the other end of the
connecting cable until it catches into the DIN
8-pole plug-jack AUX of the CD changer.
L Connection of an amplifier
Tip!
Use two cinch connection cables
(insulation and plug: white / red).
One amplifier per speaker output channel can be
connected to the device.
• Install the two cinch connection cables in the
vehicle according to their operating instructions.
• Pass two cinch connection cables to the
amplifier and carefully out of the front of the DIN
assembly bracket.
• Insert the red plug of the first cinch connection
cable as far as it will go into the OUT / REAR
cinch R plug jack (amplifier connection
[red / rear right])
fu .
• Then insert the two red plugs of the first cinch
connection cable as far as it will go into the
REAR cinch R plug jack (amplifier connection
[red / rear right]) of the amplifier.
• Insert the white plug of the first cinch
connection cable as far as it will go into the
OUT / REAR cinch L plug jack (amplifier
connection [white / rear left])
gl .
• Then insert the second white plug of the first
cinch connection cable as far as it will go into
the REAR cinch L plug jack (amplifier
connection [white / rear left]) of the amplifier.
• I nsert the red plug of the second cinch
connection cable as far as it will go into the
OUT / FRONT cinch plug jack (amplifier
connection [red / front right])
gm .
• Then insert the second red plug of the second
cinch connection cable as far as it will go into
the FRONT cinch plug jack (amplifier
connection [red / front right]) of the amplifier.
• Insert the white plug of the second cinch
connection cable as far as it will go into the
OUT / FRONT cinch plug jack (amplifier
connection [white / front left])
gn .
• Then insert the second white plug of the
second cinch connection cable as far as it will
go into the FRONT cinch plug jack (amplifier
connection [white / front left]) of the amplifier.
L Connecting a portable audio device
For establishing a cinch connection to any audio
source the headphone output (3. mm stereo jack)
of any audio device (e.g. MP3 player) can be
connected to the car radio.
Use a 3. mm jack plug connection cable to 2x
cinch plugs.
• Guide the cinch connection cable to the portable
audio device and carefully out of the front of
the DIN assembly bracket.
• Insert the red plug of the cinch connection
cable as far as it will go into the LINE IN R
Installation
KH2380_Content_UK.indd 13 12.09.2006 11:57:12 Uhr