Silvercrest KH 2380 - Manual (Page 22)

22 GB/IE
• USB ONE - the current track is recorded on
USB.
• Press the BD / ENT button bs . [RECORD] appears
in the display window 3 , followed by [R]
(flashing), information on the storage location
(e.g.
[01]) and the length of the recording (e.g.
[19.58]).
Stopping Recording
• Press the
BD / ENT button bs .
Recording from MP3 / WMA-CD
• Insert an MP3 / WMA CD into the CD compart-
ment cu .
• Insert an SD or MMC into the SD and MMC port dn .
or
Insert a USB memory stick into the USB port do .
• Use the
• LD / MD button bu to select CD mode.
• Select the track which you would like to record.
Starting Recording
• Press the
SCAN REC• button bt and keep it
pressed for two seconds. [COPY MMC]
appears in the display window 3 (if an SD or
MMC is used).
or
[COPY USB] appears in the display window 3
(if a USB memory stick is used).
The following properties are only possible by
repeatedly pressing the
SCAN REC• button bt
(depending on whether an SD / MMC or USB stick is
used)
• COPY MMC- the current track is recorded on
SD / MMC.
• COPY USB- the current track is recorded on
USB.
• Press the BD / ENT button bs . [COPY] appears in
the display window 3 . Then the percentage of
the storage medium that is used up is displayed.
Stopping Recording
• Press the
BD / ENT
button bs .
Starting Delete
• Use the
• LD / MD button bu to select the
SD / MMC mode.
• Press the SCAN REC• button bt and keep it
pressed for two seconds. [DELETE] appears in
the display window 3 .
• Press the BD / ENT -Taste bs . The current track is
deleted automatically.
L Promote Control
You can also operate the device with the remote
control.
Tip!
Familiarise yourself with use of the similar buttons
on the remote control (see Fig. F). Please see the
layout of the control panel
1 for the functions.
Ensure that the front edge of the remote control is
pointing in the direction of the sensor
co of the
control panel 1 .
• Please note that the AF function only works
with the AF button 7 on the control panel 1 .
• Please also note the modified procedure for:
Adjusting the Volume
• Increase the volume by pressing the
VOL+
button gt .
• Reduce the volume by pressing the
VOL- button hm .
Insert the battery
• Activate the unlock button
it and pull the
battery holder is from the battery compart-
ment ir (see Fig. G).
• Place a Lithium battery type CR202, 3 V DC
into the battery holder is so that one side
marked with “+” faces up. Then slide the
battery holder
is into the battery compartment
ir until it distinctly catches.
Operation / Promote Control
KH2380_Content_UK.indd 22 12.09.2006 11:57:16 Uhr