Sony DAR-RH7000 - Manual (Page 13)

13
H
ook
up
s and
Se
tti
n
gs
Inserting batteries into the remote
You can control the recorder and the speaker
system using the supplied remote. Insert two Size
R6 (AA) batteries by matching the 3 and # ends
on the batteries to the markings inside the
compartment. When using the remote, point the
remote at
(remote sensor) on the recorder.
Notes
• To operate a non Sony TV, set the code number of the
TV’s manufacturer (page 88).
• Use the batteries correctly to avoid possible leakage
and corrosion. Do not touch the liquid with bare hands
should leakage occur. Observe the following:
– Do not use a new battery with an old battery, or
batteries of different manufacturers.
– Do not attempt to recharge the batteries.
– If you do not intend to use the remote for an extended
period of time, remove the batteries.
– If battery leakage occurs, wipe out any liquid inside
the battery compartment, and insert new batteries.
• Do not expose the remote sensors (marked on the
recorder) to strong light, such as direct sunlight or
lighting apparatus. The system may not respond to the
remote.