Sony DAR-RH7000 - Manual (Page 50)

50
Timer Recording (Standard/
ShowView)
You can set the timer for a total of 30 programmes
(8 programmes when using the PDC/VPS
function), up to one month in advance.
There are two methods to set the timer: the
standard method or ShowView.
• Standard: Set the date, time, and programme
position of the programme manually.
• ShowView: Enter the ShowView number
designated for each TV programme (page 52).
Setting the timer manually
(Standard)
1
Press HDD or DVD, and press TIMER.
• If the “Timer – ShowView” display appears,
press < to switch the display to
“Standard”.
2
Select an item using </, and adjust
using M/m.
“Date”: Sets the date.
The item changes as follows:
Today
y Tomorrow y …… y Thu
28.10 (1 month later) y Sun (every Sunday)
y …… y Sat (every Saturday) y
Mon-Fri (Monday to Friday)
y Mon-Sat
(Monday to Saturday) y Sun-Sat (Sunday to
Saturday) y Today
“Start”: Sets the start time.
“Stop”: Sets the stop time.
“Prog.”: Selects the programme position or
input source.
“Media”: Selects the media, HDD or DVD.
“Mode”: Selects the recording mode
(page 48).
• If you want to change the setting for the
PDC/VPS or Update functions, select
“Details” and press ENTER. Select an item
using
</, and set using M/m.
“PDC/VPS”: Sets the PDC/VPS function. See
“About the PDC/VPS function” below.
“Update” (HDD only): Automatically records
over a previously recorded programme set to
be recorded daily or weekly.
To return to the Timer programming menu,
select “Previous” and ENTER.
• If you make a mistake, select the item and
change the setting.
+ RW -RW VR -RW
Video
- R + R HDD
1 2 3
4 6
7 8 9
0
5
</M/m/,,
ENTER
TIMER
x REC STOP
TOOLS
DVD HDD
Timer - Standard
Set the timer manually.
Cancel
ShowView
Date
:
Start
:
Stop
OK
Prog. Media Mode
Today
Details
Off On PDC/VPS Update