Sanyo VCC-WB4000P - Manual (Page 76)

Specifications
Lens : CS mount
Picture element : 1/3 inch 410,000 pixel CCD
Effective pixels : 768 (H) x 494 (V)
Minimum object illumination : 0.6 lx (F1.2, color mode), 0.03 lx (F1.2, B/W mode)
White balance : AUTO/INDOOR/OUTDOOR/MANUAL manually
selectable
Electronic shutter : 1/60 to 1/10000 sec.
Lens iris output terminal : Automatic iris, DC drive, 4-pin
ALARM IN terminal : 1 (Normal open: Non-voltage make contact; Normal
close: Non-voltage break contact)
ALARM OUT terminal : 1 (Motion detector and external input AND/OR output
function, open collector: 18 V, 25 mA)
D/N IN terminal : Day/night external switching input
Resolution : 720 x 480, 720 x 240, 640 x 480, 320 x 240,
160 x 120 pixel
Compression method : JPEG2000
Picture quality (compression ratio) : BASIC (Rough), MID 1 (low), MID 2 (medium),
MID 3 (high), HIGH (maximum)
Image transfer speed : Max. 30 fps (640 x 480 pixels)
Monitor output : PAL composite video output
Interfaces
•
Ethernet connector : 10/100 Base-T (RJ-45)
•
RS-232C connector : D-Sub 9-pin
•
PC card slot : PCMCIA Type II (5 V power supply only)
Pre-/post-alarm buffer : 16 MB
Protocols : TCP/IP, PPP, FTP, HTTP, SMTP, NTP
Software : Plug-in browser (Internet Explorer compatible)
Clock backup : 8 hours
Operating conditions
•
Temperature : –10 ~ +50°C
•
Humidity : 90% R.H. or less
Power supply : 24 V AC
±
10%, 50/60 Hz, 12 V DC
±
10%
Power consumption : 11 W
Weight : Approx. 480 g
L5AM2/XE (VCC-WB4000P) GB 2004, 2, 17
English – 75 –