Sanus Systems WFV44 - Manual (Page 7)

Step 10: Door Install
Position the Door (s) so the holes in the Hinge Plate (m) line up with the front pair of holes in the Side Panel (u,v). Insert a Hinge Plate
Screw (k) through the Hinge Plate and thread it into each hole in the Side Panel. Tighten with a Phillips screw driver. Repeat process so
each Hinge Assembly is secured. See Diagram 10 for assistance.
Detailed View
Diagram 10
s
m
k
u
Step 10: Add Mid Shelves
Thread a Shelf Pin (e) into the desired location in the Panels (u,v,w). For each shelf, four Shelf Pins will be required. Insert each Mid
Shelf (r) into the assembly and press fit onto the Shelf Pins. Make sure the wood strip on each shelf is facing toward the front. See Dia-
gram 10 for assistance. Note: Diagram 10 is a Back View.
Detailed View
Diagram 10
u
v w
e
r