Sharp XG-NV51XE - Manual (Page 43)

40
Appendix
Transporting the Projector
When transporting the projector, carry it by the carrying handle on the side. A soft-side carrying bag is also
provided to transport the projector.
Using the Carrying Handle
Using the Carrying Bag
CAUTION
• Always put on the lens cap to prevent damage to the lens
when transporting the projector.
• Do not lift or carry the projector by the lens or the lens cap
as this may damage the lens.
Before placing the projector into the carrying bag, set up
the inner pad inside the bag as shown.
CAUTION
• The supplied carrying bag is made exclusively for the
projector and its supplied accessories. Do not place other
items into the carrying bag with the projector or use the
bag to transport items other than the projector and its
accessories.
• This bag is provided merely to transport the projector and
its accessories, not to protect these products from damage
as a result of rough handling. Do not expose these products
to shocks or impact when transported in the carrying bag.
• Wait until the projector has sufficiently cooled before placing
it into the carrying bag. If the projector is placed into the
bag while it is still hot, the heat may damage the bag lining.
Carrying bag
Carrying handle
Attaching the shoulder strap to the carrying bag
Projector
Inner pad
1 Take the shoulder strap
out. 2 Fasten the shoulder strap
to the carrying bag.
The shoulder strap is stored in
the pocket located in front of
the carrying bag.
Follow the same procedure for the
other end of the strap.
The strap should
extend at least
6 cm from the
buckle.
6 cm