Important safeguards – Sharp XG-NV51XE User Manual

Page 6

Advertising
background image

3

Important

Information

Important Safeguards

ATTENTION: Please read all of these instructions before you operate your LCD Projector
for the first time. Save these instructions for future reference.

For your own protection and prolonged operation of your LCD Projector, be sure to read the following “Important
Safeguards” carefully, before use.
This projector has been engineered and manufactured to ensure your personal safety. But IMPROPER USE CAN
RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards
incorporated into this LCD Projector, observe the following basic rules for its installation, use and servicing.

1. Unplug the LCD Projector from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the LCD Projector manufacturer, as they may cause hazards.
4. Do not use the LCD Projector near water; for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement, near a swimming pool, etc. Never spill liquid into the projector.

5. Do not place the LCD Projector on an unstable cart, stand, or table. The LCD Projector may fall, which may cause

serious injury to a child or an adult, and/or serious damage to the unit.

6. Wall or Ceiling Mounting—The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
7. LCD Projector equipment and cart combinations should be moved with care. Quick stops, exces-

sive force, and uneven surfaces may cause the equipment and cart combination to overturn.

8. Slots and openings in the cabinet back and bottom are provided for ventilation. To ensure reliable

operation of the LCD Projector and to protect it from overheating, these openings must not be
blocked or covered. The openings should never be covered with cloth or other material.

9. This LCD Projector should never be placed near or over a radiator or heating vent. The LCD Projector should not be

placed in a built-in installation such as a bookcase unless proper ventilation is provided.

10. The LCD Projector should be operated only from the type of power source indicated on the back of the projector or in the

specifications. If you are not sure of the type of power supplied to your home, consult your LCD Projector dealer or local
power company.

11. Do not place the LCD Projector where the cord will be abused by persons walking on it.
12. Follow all warnings and instructions marked on the LCD Projector.
13. To prevent damage to the projector due to lightning and power-line surges, unplug the projector from the power outlet,

when not in use.

14. Do not overload wall outlets and extension cords with too many products, because this can result in fire or electric

shock.

15. Never push objects of any kind into the LCD Projector through the cabinet slots as they may touch high-voltage points

or cause a short circuit. This could result in a fire or electric shock.

16. Do not attempt to service the LCD Projector yourself. Opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified service personnel.

17. Unplug the LCD Projector equipment from the wall outlet and refer servicing to qualified service personnel under the

following conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the LCD Projector.

c. If the LCD Projector has been exposed to rain or water.

d. If the LCD Projector does not operate normally when you follow the operating instructions. Adjust only those

controls that are covered by the operating instructions, as improper adjustment of other controls may cause
damage and will often require extensive work by a qualified technician to restore the LCD Projector to normal
operation.

e. If the LCD Projector has been dropped or the cabinet has been damaged.

f. When the LCD Projector exhibits a distinct change in performance—this indicates a need for service.

18. When replacement parts are required, be sure the service technician has used replacement parts specified by the

manufacturer that have the same characteristics as the original parts. Unauthorised substitutions may result in fire,
electric shock, or other hazards.

19. This LCD Projector is provided with one of the following types of plugs. If the plug should fail to fit into the power outlet,

please contact your electrician.
Do not defeat the safety purpose of the plug.

a. Two-wire type mains plug.

b. Three-wire grounding type mains plug with a grounding terminal.

This plug will only fit into a grounding type power outlet.

Advertising