Sinclair Duro - Manual (Page 3)

3
Please make sure any user of the machine is familiar with these instructions
before work begins.
3.2 Danger while working with the machine
The Duro
® Stripper is designed to the highest technical standards.
Incorrect use can be dangerous!
Use this machine only:
- As instructed in this operating manual.
- With the machine in perfect working order.
Disturbances that could impair safety have to be eliminated at once.
3.3 Restriction of use
The Duro
® Stripper is exclusively for removing bonded floor covering in dry
environments. It should not be used for any other purpose. Sinclair Equipment
Company cannot be held responsible for any damage or loss caused by incorrect
use.
Correct use also includes:
- To take care of all directions from the operating manual and
- The execution of maintenance and service.
4.0 Maintenance
The Duro
® Stripper is virtually maintenance free.
* Check brushes periodically to prevent damage to armature.
* Changing the blade
Disconnect the power supply and put on the blade protection before changing the
blade. Use work gloves for your own safety. Loosen the screws of the blade
mounting, remove the blade and replace it.
Make sure that the sharp bevel of the blade always shows upwards and the blade
is fitting in exactly the position of the old one.
4.1 Genuine Spare Parts
Spare parts and accessories are manufactured uniquely for the Duro
® Stripper.
It must be emphasized that parts obtained from unauthorized sources must not be
used.
Sinclair Equipment Company cannot be held responsible for the performance of
or any damage arising from the use of machines in which genuine spare parts
have not been used.
This is particularly important with replacement blades.