Sinclair Duro - Manual (Page 5)

5
6.0 Information about various floorings
Main applications of the Duro® Stripper are carpets with foam backing,
CV-flooring, PVC-floorings and light carpets.
CV-floorings, PVC-floorings and carpets without foam backing
Cut strips according to the blade width. Check from time to time if the blade is
straight.
Carpets with foam backing
Use sharp blades only! Remove upper layer with carpet clamp. Remove the foam
backing with the stripper. Remove foam across the width if you have an uneven
sub-floor.
Semi-flexible tiles
These tiles can be removed without pre-cutting, if they are not bonded extremely
tight.
7.0 Trouble shooting
Trouble Eventual Cause Elimination
Machine does not start -Power supply disconnected
-Blown fuse
-Defective cable
-Defective plug Have machine repaired by a
qualified electrician, resp.
change parts.
Undue force necessary to
strip the flooring Blade is blunt Change blades
Excessive vibration Expendable parts are worn
out Return machine for service
and/or repair