Sony DAV-SB300 - Manual (Page 60)

60 GB
For automatic tuning, press and hold TUNING +
or – on the remote. Press x when you stop the
automatic tuning.
Tips
• If an FM program is noisy, press FM MODE on the
remote so that “MONO” appears in the front panel
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve reception, reorient the supplied antennas
(aerials).
To check the frequency or sound
field
Press DISPLAY repeatedly.
Each time you press DISPLAY, the front panel
display changes as follows:
index name of the station*
t frequency t
sound field t volume t index name of the
station...
* This is displayed if you have entered a name
for a preset station (page 60).
Naming Preset Stations
You can enter a name of up to 9 characters for
preset stations. These names (for example,
“XYZ”) appear in the system’s front panel
display when a station is selected.
Note that no more than one name can be entered
for each preset station.
1
Press FUNCTION repeatedly until “FM”
or “AM” appears in the front panel
display.
The last station you received is tuned in.
Each time you press FUNCTION, the mode
of the system changes in the following
sequence:
TUNER FM t TUNER AM t VIDEO
t SAT t TV t DVD t TUNER FM…
2
Press PRESET+ or – repeatedly to
select the preset station you want to
create an index name for.
3
Press TUNER MENU.
4
Press C or c repeatedly until “NAME
IN” appears.
5
Press ENTER.
6
Create an index name by using the
cursor buttons:
Press X/x to select a character, then press c
to move the cursor to the next position.
If you make a mistake
Press C or c repeatedly until the character
to be changed flashes, then press X/x to
select the desired character. Capital letters,
numbers, and 9 symbols (’ - / , + < > _ blank
space) can be input for a radio station name.
7
Press ENTER.
The station name is stored.
1 2 3
4 5
8
0
6
7
10
9
TUNER
MENU
FUNCTION
C / X / x / c
ENTER
PRESET
–/+