Samsung HC-P5256W - Manual (Page 51)

English - 51
S P E C I A L F E AT U R E S
Changing the Position of the Sub picture
7
Press the ▼ button to
select “Position”, then
press the ENTER button.
Press the ▲ or ▼ button to
position the PIP screen
where you want, then
press the ENTER button.
PIP : On
Source : TV
Swap
Size
:
Position :
PIP Channel : Cable 6
T V PIP
Changing the Channel of the Sub picture
After you set the signal source (antenna or cable) for the sub picture, it is easy to change
channels.
8
Press the … or † button to
select “Channel”, then press
the ENTER button.
Press the … or † button to
select a channel you want,
then press the ENTER button.
Press the EXIT button to
exit.
œ The channels of sub picture
are not available when the
antenna is set to “Air IN”.
It links to “Cable IN”.
œ In the PIP mode, the main
and sub pictures are stilled at
the same time.
Alternate method:
Press the CH
or CH
button to change channels
of sub picture during PIP on.
PIP : On
Source : TV
Swap
Size
:
Position :
PIP Channel : Cable 6
T V PIP
Press the STILL button to freeze a
moving picture.
(Normal sound will still be heard.)
Press again to cancel.
Freezing the Picture
Cable 6
BP68-00334A-00Eng 5/20/04 4:55 PM Page 51