Samsung 2032MW - Manual (Page 19)

Connecting the monitor
1.Connecting to a Computer
1. Connect the power cord for your monitor to the POWER on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Use appropriate connection for your computer.
2-1. Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the PC port on the back of your monitor.
[PC]
2-2. Using the DVI (Digital) connector on the video card.
Connect the DVI cable to the DVI-D port on the back of your monitor.
[DVI-D]
3. Connect the HDMI / PC / DVI-D AUDIO IN port on the rear side of the monitor to the sound card of the
PC.
4. Turn on both your computer and the monitor.
2. Connecting to a Macintosh