Samsung 2032MW - Manual (Page 38)

OSD Description Play / Stop
Language You can choose one of 8 languages.
Note : The language chosen affects only the language of the OSD.
It has no effect on any software running on the computer.
Sleep Timer Turns the monitor off after a pre-determined period of time.
1) Off 2) 30 3) 60 4) 90 5) 120 6) 150 7) 180
The direct button on the remote control is the 'SLEEP' button.
Transparency Changes the opaqueness of the background of the OSD.
1) High
2) Medium
3) Low
4) Opaque
Blue Screen If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to continue
viewing the poor picture, you must set the "Blue screen" mode to "Off".
Off
On
Reset Picture parameters are replaced with the factory default values.
1) Image Reset
2) Colour Reset
1) Image Reset
2) Colour Reset
HDMI Black
Level When a DVD or set-top box is connected to your TV via HDMI, it may cause
a degradation in the screen quality, such as an increase in the black level, a
low contrast, or discoloration, etc., depending on the external device
connected. In this case, adjust the screen quality of your TV by configuring
the HDMI black level.
Normal
Low