Sharp TINSE0568AWZZ - Manual (Page 30)

30
IM-DR580H
03/10/15 IM-DR580H(E)3.fm IM-DR580H(E) TINSE0568AWZZ
R
ecor
d
in
g
-Re
c
o
rd
ing f
rom a
M
ic
rop
hone
-
Recording from a Microphone (continued)
" Sound-actuated recording (Mic Synchro-
nised recording)
[Operate with the multi-link station or the remote con-
trol]
( ) indicates remote control operations.
1
Connect a plug-in microphone to the MIC IN socket
on the main unit (page 26).
2
Insert a recordable MiniDisc (page 12).
3
To operate with the multi-link station, place the
main unit on the multi-link station. (To use the re-
mote control, connect it to the main unit.)
4
Press the REC button.
! The record indicator flashes.
! The REC button functions even if the main unit is
turned off.
5
Press the MODE/-CHARGE (MODE) button repeat-
edly to select the recording mode (page 33).
6
Press the MENU button.
The menu selection mode is activated.
7
Select "MIC LEVEL" ("MICLevel") by pressing the
or button, and then press the ENTER /-USB
( ) button.
8
Select "ALC-H", "ALC-L" or "MANUAL" by pressing
the
or button, and the press the ENTER /-USB
( ) button (page 29).
9
Press the MENU button.
The unit enters the menu select
mode.
10
Select "SYNC REC" by press-
ing the or button and
press the ENTER/-USB ( )
button.
11
Select the recording start lev-
el by pressing the or
button and press the ENTER/-
USB (
) button.
! "SYNC" will flash.
MIC SYNC H (High):
Recording starts when the unit detects -24 dB or more
(the unit can start recording from quiet sounds).
MIC SYNC L (Low):
Recording starts when the unit detects -12 dB or more.
OFF:
Synchro recording is deactivated. ("OFF" cannot be se-
lected with the remote control.)
12
When a sound, such as person speaking, is picked
up by the microphone, recording will begin auto-
matically.
! "SYNC" lights up.