SVAT Electronics CV0104DVR - Manual (Page 20)

CV0104DVR 17
SVAT ELECTRONICS
Now You Can See
5.4 RECORD SETUP
1. Record Type - Press ENTER to select between QUAD and EACH mode. QUAD
mode will record all four cameras, but will not let you view each camera individually
during playback. EACH mode will record all four cameras and allow you to view
each camera individually during playback.
2. Video Quality - Press ENTER to change between LOW, MEDIUM or HIGH video
quality. Higher quality settings will result in better image clarity but larger file sizes.
Lower quality settings will result in reduced image clarity but smaller file sizes.
3. Frame Rate Options: Frame Rate is the number of frames recorded per second. 30
frames per second is the maximum, and provides smooth video playback. Fewer
frames per second result in the video being less smooth, but smaller in size. There
are 2 frame rate options in this menu:
-Timer Rec Frame Rate - Press enter to set the recording frame rate when the “T”
(timer) mode is set up under schedule record.
-Motion Rec Frame Rate - Press enter to set the recording frame rate when
“M” (motion) or “A” (alarm) modes are set up under schedule record.
Recording frame rates available:
NTSC: 30, 15, 10, 7, 5, 4, 3, 2, 1
PAL: 25, 12, 8, 6, 4, 3, 2, 1