Cordless telephone operation, Receiving calls with the handset off the base unit, Storing numbers – Sylvania STC580 User Manual
Page 11
Cordless Telephone Operation
10
Receiving Calls with the HANDSET on the BASE UNIT
1.
When the phone rings, lift the HANDS E T .
The IN USE LED indicator will light up.
NOTE: The HANDSET RINGER ON/OFF
switch must be in the “ON” position for
ringer to operate.
2.
Start your conversation.
3.
To end your conversation, either press the
TALK button or place the HANDSET on
the BASE UNIT. If you place the HANDSET
on the BASE UNIT CHARGE CRADLE, you
activate the automatic STANDBY feature.
Receiving Calls with the HANDSET off the BASE UNIT
1.
When the phone rings, press the TALK button. The IN USE LED indicator will light up.
2.
Start your conversation.
3.
To end your conversation, either press the TALK button or place the HANDSET on the
BASE UNIT. If you place the HANDSET on the BASE UNIT CHARGE CRADLE, you activate
the automatic STANDBY feature.
Storing Numbers
1.
Be sure the BASE UNIT IN USE LED
indicator is off and the HANDSET is in
STANDBY mode.
2.
Press the MEMO button.
3.
Dial the number you want to store.
4.
Press the MEMO button again.
5 . Dial the TELEPHONE KEYPAD 0~9
button where you want to store that
number. You will hear one
confirmation “beep.”
6.
Repeat steps 1 through 5 to store other
telephone numbers.
In Use
Low Batt.
VOL
REDIAL
PAUSE
TALK
MEMO
CH
MUTE
FLASH
3
VOL