Sylvania STC580 - Manual (Page 6)

HANDSET Controls
5
1. REDIAL/PAUSE Button: (REDIAL) Press to REDIAL the last number you called.
(PAUSE) Press to insert a PAUSE while dialing. (You will need the PAUSE
button to dial numbers which use an alternative Long Distance Access Code.)
2. VOL (VOLUME) Button: During a call, press the (+) button to increase the
receiver volume level from LOW, MEDIUM, HIGH, or MAXIMUM. Press the (-)
button to decrease the receiver volume level.
3. CH (CHANNEL) Button: Press to change the operating channel when you hear
interference.
4. MEMO Button: Press to store phone numbers in memory or to call a number
you have previously stored.
5. HEADSET JACK: For connecting your headset plug to enjoy hands-free
communication. (See page 12 for detail).
6. TEMPORARY TONE (*) Button: Press to temporarily change the dialing mode
from PULSE to TONE for Rotary Service Users. (Press once before entering
numbers to access the Answering System or electronic banking services, etc.)
7. MICROPHONE
8. ANTENNA
9. IN USE/LOW BATT LED Indicator: (IN USE) Lights up when the HANDSET is in
TALK mode. (LOW BATT) Blinks when the battery charge is low (See page 14
for detail.)
10. MUTE Button: Press to mute the HANDSET microphone while having a phone
conversation.
11. FLASH Button: Press to answer an incoming call if you have Call Waiting.
12. TALK Button: Press to answer an incoming call or to place a call. Press to end
a call.
13. RINGER ON/OFF Switch: Set switch to ON to activate the ringer on the
HANDSET. Set switch to OFF to deactivate the HANDSET ringer.
14. CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET.
We recommend cleaning the CHARGE CONTACTS periodically with a damp
cloth.