Maintaining the toner cartridge, Checking the remaining toner – Samsung ML-3050 User Manual

Page 38

Advertising
background image

8.2

<Maintenance>

4

Locate the long strip of glass (LSU) inside the top of the cartridge

compartment, and gently swab the glass to see if dirt turns the

white cotton black.

5

Reinsert the toner cartridge and close the front cover.

6

Plug in the power cord and turn the printer on.

Printing a cleaning sheet

If you are experiencing blurred, faded, or smeared printouts, you can

clear the problem by printing a cleaning sheet, provided by your printer.

You can print:
• OPC Cleaning sheet: cleans the OPC drum of the toner cartridge.
• Fuser Cleaning sheet: cleans the fuser unit inside the printer.
In the ML-3050, press and hold down Stop for about 10 seconds to print

a OPC cleaning sheet.
In the ML-3051N and

ML-3051ND, this process will produce a page with

toner debris, which should be discarded.

1

Make sure that the printer is turned on with paper loaded in the tray.

2

Press Menu until System Setup appears on the bottom line of the

display and press OK.

3

Press the Scroll buttons until Maintenance appears and press OK.

4

When

Clean Drum

appears, press OK.

Or, press the Scroll buttons until

Clean Drum or

Clean Fuser

appears and press OK.
Your printer automatically picks up a sheet of paper from the tray

and prints out a cleaning sheet with dust or toner particles on it.

Maintaining the toner cartridge

Toner cartridge storage

To get the most from the toner cartridge, keep the following guidelines

in mind:
• Do not remove the toner cartridge from its package until ready for use.
• Do not refill the toner cartridge. The printer warranty does not cover

damage caused by using a refilled cartridge.

• Store toner cartridge in the same environment as the printer.
• To prevent damage to the toner cartridge, do not expose it to light for

more than a few minute.

Expected cartridge life

The life of the toner cartridge depends on the amount of toner that print

jobs require. When printing text at ISO 19752 5% coverage, a new toner

cartridge lasts an average of either 8,000 or 4,000 pages. (The original

toner cartridge supplied with the printer lasts an average of 4,000

pages.) The actual number may also be different depending on the print

density of the pages you print on, and the number of pages may be

affected by operating environment, printing interval, media type, and

media size. If you print a lot of graphics, you may need to change the

cartridge more often.

Saving Toner

To save toner, press Toner Save on the control panel. The button

backlight turns on.
Using this feature extends the life of the toner cartridge and reduce

your cost per page, but it also reduces print quality.

Checking the remaining toner

(ML-3051N, ML-3051ND only)

You can check the level of toner left in the cartridge.
If you are having print quality problems, this can help you determine if

the problem is caused by low toner.

1

Press Menu until System Setup appears on the bottom line of the

display press OK.

2

Press the Scroll buttons until Maintenance appears and press OK.

3

Press the Scroll buttons until Supplies Life appears and press OK.

4

Press the Scroll buttons to access Toner Remains and press OK.
The display shows the percentage of the remaining toner.

Note

While the following messages are appearing on the display, the

sub-menu(s) under Supplies Life can be changed:
-

Invalid Toner, NonGenuine Toner, Replace Toner,

Toner Exhausted

Advertising