Samsung SRS610HDSS - Manual (Page 9)

setting up _
setting up your side-by-side
refrigerator
getting reaDy to instaLL tHe refrigerator
Congratulations on the purchase of your Samsung Side-By-Side Refrigerator. We hope you will enjoy the
many state-of-the-art features and efficiencies that this new appliance has to offer.
Selecting the best location for the refrigerator
• Select a location with easy access to the water supply.
• Select a location without direct exposure to sunlight.
• Select a location with level (or nearly level) flooring.
• Select a location with enough space for the refrigerator doors to open easily.
• Allow sufficient space to install the refrigerator on a flat surface.
- If your refrigerator is not level, the internal cooling system may not work correctly.
- Overall space required in use. Refer to drawing and dimension as below.
First things first! Make sure that you can easily move your refrigerator to its final location by
measuring doorways (both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of each Samsung Side-By-Side
Refrigerator.
MOdel Rsh1K*** Rsh1J*** Rsh1f/d*** Rsh1b/N***
Capacity(L) 506 524 554
Dimension
(mm)
Width
W/O Chassis 908
With Chassis 911
Depth
Only Cabinet 600
W/O Handle 677
With Handle
736
(EASYType based)
725(O-Type based)
Height
W/O Door 1743
With Door 1786
• Allow clearance to the right, left, back and top when installing. This will help reduce
power consumption and keep your energy bills lower.
• Do not install the refrigerator where the temperature will go below 50°F (10°C).
• Make sure you disconnect the water supply line BEFORE removing the freezer door.
See the next section on “Separating the Water Line” to avoid damage.
25mm
25mm
at least 50mm at least 50mm
01
setting
u
P
DA99-01507A(HM-134a)-EN(0.0).ind9 9 2007.4.21 9:59:42 AM