Samsung Digimax i5 - Manual (Page 14)

《 14 》
Connecting to a Power Source
If you have access to a mains supply, using an SAC-41 allows the camera to be used for long
periods of time.
Plug the SAC-41 into the DC connection terminal on the camera or cradle.
Before turning on the camera power with an SAC-41, insert the rechargeable battery that was
charged for over 10 minutes with turning off the camera.
● Charging with the cradle
1. Insert the rechargeable battery into the battery
chamber.
■ How to charge the rechargeable battery (SLB-0737) with the SAC-41.
Using the SAC-41
● Always turn off the power before taking the SAC-41 out of the mains supply.
● As with all mains powered devices, safety is important. Ensure that neither the camera
nor Charger comes into contact with water or metallic materials.
● Please ensure that you use the SAC-41 with the correct specification for the camera.
Failure to do so may affect your warranty.
DANGER
2. Place the camera correctly in the
cradle.
3. Put the SAC-41 into your power socket
and DC connection terminal of the cradle.
Charging LED