Sharp AR-F152 User Manual
Page 15
13
2
Making copies
NORMAL COPYING
Place the original(s) face up in the document feeder tray or face down on the original
table.
A. When using the SPF:
(1) Make sure that no original is left on the original table.
(2) Adjust the original guides to the size of originals.
(3) Set the originals face up in the document feeder tray.
●
Before feeding originals in the document feeder tray, be sure to remove any
staples or paper clips from them.
●
Before placing curled or wavy originals into the document feeding tray, be
sure to flatten them. If not, original misfeeds may result.
●
The SPF (
) indicator on the operation panel will light up. If this indicator
does not light up, the originals are not properly set or the SPF is not properly
closed.
●
Badly damaged originals may misfeed in the SPF. It is recommended that
such originals be copied from the original table.
●
Special originals such as transparency film should not be fed through the
SPF, but should be placed directly on the original table.
Original face up
B. When using the original table:
(1) Open the original cover.
(2) Place an original face down on the original table. Align it with the original scale
and the centering ( ) mark. Close the original cover.
mark
Original scale