Sharp AR-F152 - Manual (Page 33)

31
5
Copier troub
le?
MISFEED REMOVAL
E Misfeed in the SPF
An original misfeed may occur at one of three locations: if the misfed original is seen from the
document feeder tray, (A) in the document feeder tray; if the misfed original is not seen from the
document feeder tray, (B) in the exit area or (C) under the feeding roller. Remove the misfed
original following the instructions for each location.
(A) Open the feeding roller cover and pull the original gently to the left and out from the
document feeder tray. Close the feeding roller cover. Open and close the original cover to
clear the SPF misfeed ( ) indicator.
If the misfed original cannot be easily removed, proceed to (C) without pulling the original
forcibly from the document feeder tray.
Feeding roller cover
(B) Open the original cover and rotate the roller rotating knob to remove the misfed original
from the exit area.
If the misfed original cannot be easily removed, proceed to (C) without pulling the original
forcibly.
Roller rotating knob
(C) If the original does not move easily into the exit area, remove it in the direction of the arrow
while rotating the knob.
A number may appear in the display after a minus sign, indicating the number of
the originals that must be returned to the document feeder tray.
Clear the misfeed and return the required number of originals. Then press the
print (
) key to resume copying.