Activating licenses in sonicos – SonicWALL EClass NSA E6500 User Manual
Page 29
Page 28
Initial Setup
Activating Licenses in SonicOS
After completing the registration process in SonicOS, you must
perform the following tasks to activate your licenses and enable
your licensed services from within the SonicOS user interface:
•
Activate licenses
•
Enable security services
•
Apply services to network zones
This section describes how to activate your licenses. For
instructions on how to enable security services and apply
services to network zones, see the following sections:
•
Enabling Security Services in SonicOS
•
Applying Security Services to Zones
To activate licensed services in SonicOS, you can enter the
license keyset manually, or you can synchronize all licenses at
once with mysonicwall.com.
The Setup Wizard automatically synchronizes all licenses with
mysonicwall.com if the appliance has Internet access during
initial setup. If initial setup is already complete, you can
synchronize licenses from the System > Licenses page.
Manual upgrade using the license keyset is useful when your
appliance is not connected to the Internet. The license keyset
includes all license keys for services or software enabled on
mysonicwall.com. It is available on mysonicwall.com at the top
of the Service Management page for your SonicWALL
appliance.
To activate licenses in SonicOS:
1.
Navigate to the System > Licenses page.
2.
Under Manage Security Services Online do one of the
following:
•
Enter your mysonicwall.com credentials, then click the
Synchronize button to synchronize licenses with
mysonicwall.com.
•
Paste the license keyset into the Manual Upgrade
Keyset field.
3.
Click Submit.
NSA_E6500_GSG.book Page 28 Wednesday, June 17, 2009 7:16 PM