SonicWALL EClass NSA E6500 - Manual (Page 49)

Page 48 Enabling Security Services in SonicOS
Enabling Security Services in SonicOS
You must enable each security service individually in the
SonicOS user interface. See the following procedures to enable
and configure the following three basic security services:
Gateway Anti-Virus
Intrusion Prevention
Anti-Spyware
For more information on configuring your security services,
refer to the SonicOS Administrator’s Guide.
Applying Security Services to Zones
A network zone is a logical group of one or more interfaces to
which you can apply security rules to regulate traffic passing
from one zone to another zone.
Security services such as Gateway Anti-Virus are automatically
applied to the LAN and WAN network zones when you activate
the license and enable the service. To protect other zones such
as the DMZ or Wireless LAN (WLAN), you must apply the
security services to the network zones. For example, you can
configure SonicWALL Intrusion Prevention Service for incoming
and outgoing traffic on the WLAN zone to add more security for
internal network traffic.
To apply services to network zones:
1.
Navigate to the Network > Zones page.
2. In the Zone Settings table, click the Configure icon for the
zone where you want to apply security services.
3. In the Edit Zone dialog box on the General tab, select the
checkboxes for the security services to enable on this
zone.
4. On the Edit Zone page, select the checkboxes for the
security services that you want to enable.
5. Click OK.
6. To enable security services on other zones, repeat steps 2
through 4 for each zone.
NSA_E6500_GSG.book Page 48 Wednesday, June 17, 2009 7:16 PM