Sharp MD-MX30 MD - Manual (Page 13)

12
SOUND CONTROL
■ Volume
(Main unit operation)
When the VOLUME control is turned clockwise, the vol-
ume will increase. When it is turned counterclockwise,
the volume will decrease.
(Remote control operation)
Press the VOLUME
button to increase the volume and
the VOLUME button to decrease the volume.
FLAT
VOCAL SOFT
HEAVY
(Main unit) (Remote control)
EQUALIZER
(Remote control) (Main unit)
X-BASS X-BASS
X-BASS
SURROUND SURROUND
(Remote control) (Main unit)
SURROUND
0 15 MAX
(Main unit) (Remote control)
■ Extra bass (X-BASS)
Press the SURROUND button to widen the soundstage
and surround you with sound.
● "SURROUND" will appear.
Press the SURROUND button again to cancel the sur-
round mode.
● "PASS" will appear.
Press the X-BASS button to emphasize the bass region
of the frequency spectrum.
● "X-BASS ON" will appear.
Press the X-BASS button again to cancel the extra bass
mode.
● "X-BASS OFF" will appear.
Note:
● Turn the X-BASS to the off position when playing the unit
at high volume levels to avoid speaker distortion.
■ Surround
■ Pre-programmed equalizer
When the EQUALIZER button is pressed, the current
mode setting will be displayed. To change to a different
mode, press the EQUALIZER button repeatedly.
FLAT: The sound is not modified.
HEAVY: Bass and treble are emphasized.
VOCAL: Vocals (midrange tones) are emphasized.
SOFT: Treble is reduced.
(Main unit) (Remote control)
VOLUME
SELECT
Servo Powered Volume:
The VOLUME control automatically comes out when the
power is turned on, and goes back when the unit is set to
the stand-by mode.
● When the power is turned on, you can put the VOLUME
control in and out by pressing the VOLUME SELECT but-
ton.
Note:
● Do not push in the VOLUME control forcibly with your fin-
ger as this may damage the unit.