Sharp MD-MX30 MD User Manual
Page 29
28
■
To change disc names and track names
●
To add a character:
(Example: To change "BET" to "BEST")
1
To change disc names, perform steps 1 - 3 on page 26.
To change track names, perform steps 1 - 2 on page 27.
2
Press the
3
3
3
3
3
or
2
2
2
2
2
button to flash the character at
the place you want to add a letter.
DISC
●
To cancel the operation, press the MD
■
button.
3
Select the character you want to add, using the jog
dial. Then, press the MEMORY/ENTER button.
DISC
DISC
●
The selected character will be added, and the original
characters will move to the right by one.
4
After entering all of the characters in the name, press
the NAME/TOC EDIT button.
Note:
●
You cannot modify disc or track names created on other
equipment if they are over 40 characters.
In this case, erase the name and then enter a new name.
●
To delete a character:
(Example: To change "BESUT" to "BEST")
1
To change disc names, perform steps 1 - 3 on page 26.
To change track names, perform steps 1 - 2 on page 27.
2
Press the
3
3
3
3
3
or
2
2
2
2
2
button to flash the character to
erase.
DISC
●
To cancel the operation, press the MD
■
button.
3
Press the TIMER/DELETE button.
DISC
●
After this step, if you are not going to enter a character, go
to step 5.
4
Select the character you want to add, using the jog
dial. Then, press the MEMORY/ENTER button.
●
The selected character will be added, and the original
characters will move to the right by one.
5
After entering all of the characters in the name, press
the NAME/TOC EDIT button.
(Continued)
NAME/TOC EDIT
MEMORY/
ENTER
Jog dial
MD
■
3
2
TIMER/DELETE