Sony CDX-C760 - Manual (Page 17)

17
EN
Notes
• “*Wait*” appears in the display while the unit is reading
the data, or when a disc has not been put into the unit.
• “*Mem Full*” appears in the display when you try to
enter more than 12 tracks into a program.
Playing the stored program
Changing the disc order in the changer will not
affect program memory play.
You can select:
•PGM 1 to play Program 1.
•PGM 2 to play Program 2.
•PGM 1+2 to play Programs 1 and 2.
1
Press (SHIFT).
2
Press (3) (PLAY MODE) repeatedly until
“PGM” appears.
3
Press (4) (n) repeatedly until the
desired program appears.
z PGM 1 z PGM 2 z PGM 1+2
PGM off Z
Program Play starts.
4
Press (SHIFT).
To go back to normal playback mode, select
“PGM off” in step 3 above.
Notes
• If you press the number button during program memory
play, program memory play is interrupted, and playback
of the selected disc starts.
• “NO Data” appears in the display if no track is stored in
the program.
• If a track stored into the program memory is not in the
disc magazine, the track will be skipped.
• When the disc magazine contains no tracks stored into
the program memory, or when the program information
has not been loaded yet, “Not Ready” appears.
Creating a program
— Program Memory (CD/MD changer with
the program memory function)
You can play tracks in the order you want by
making your own program. You can make two
programs: Program 1 and Program 2. You can
select up to 12 tracks for each program. You
can store the programs in memory.
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
Program edit mode
“P 1” shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
To select Program 2, press (4) (n)
repeatedly until “P 2” appears.
2
Select the track you want.
1 Press (SOURCE) repeatedly to select
CD or MD.
2 Press (MODE) repeatedly to select the
changer.
3 Press (SHIFT), then press the number
button to select the disc.
4 Press (SHIFT).
5 Press either side of (SEEK/AMS) to
select the track.
3
Press (5) (ENTER) momentarily.
4
To continue entering tracks, repeat steps
2 and 3.
5
When you finish entering tracks, press
(3) (PLAY MODE) for two seconds.
6
Press (SHIFT).
µ
PLAY MODE ENTER
EQ SUR
DISC TRACK
C D 2
2 3 P1.‚1
PLAY MODE
EQ SUR
DISC TRACK
C D 2
3 2 P1.‚2
PLAY MODE ENTER
EQ SUR
P 1
+Enter+
CD/MD Changer