Getting started, Resetting the unit, Detaching the front panel – Sony CDX-C760 User Manual

Page 4: Preparing the rotary remote

Advertising
background image

4

EN

Getting Started

Resetting the unit

Before operating the unit for the first time or
after replacing the car battery, you must reset
the unit.
Press the reset button with a pointed object,
such as a ball-point pen.

Notes
• Pressing the reset button will erase the clock and same

memorized functions.

• When you connect the power supply cord to the unit or

reset the unit, wait for about 10 seconds before you insert
a disc. If you insert a disc within these 10 seconds, the
unit will not be reset, and you will have to press the reset
button again.

Detaching the front panel

You can detach the front panel of this unit to
prevent the unit from being stolen.

1

Press (OFF).

2

Press (RELEASE) to open up the front
panel. Then slide the front panel a little
to the left, and pull it off towards you.

Notes
• Be sure not to drop the panel when detaching it from the

unit.

If you press (RELEASE) to detach the panel while the

unit is still on, the unit will turn off automatically to
prevent the speakers from being damaged.

When you carry the front panel with you, put it in the

supplied front panel case.

Attaching the front panel

Align part A of the front panel to part B of
the unit as illustrated, and push until it clicks.

Notes
• Be sure not to attach the front panel upside down.
Do not press the front panel hard against the unit when

attaching it. Press it lightly against the unit.

Do not press hard or put excessive pressure on the

display windows of the front panel.

Do not expose the front panel to direct sunlight, heat

sources such as hot air ducts, and do not leave it in a
humid place. Never leave it on the dashboard of a car
parked in direct sunlight where there may be a
considerable rise in temperature.

Caution alarm

If you turn the ignition key switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds
(only when the POWER SELECT switch is set
to the A position).

Preparing the rotary
remote

When you mount the rotary remote, attach the
label in the illustration below.

B

A

Reset button

(OFF)

(RELEASE)

SOUND

LIST

MODE

SOUND

LIST

MODE

Advertising