SUPER MICRO Computer X7SBL-LN1/LN2 - Manual (Page 41)

Chapter 2: Installation
2-23
2-7 Jumper Settings
Explanation of Jumpers
To modify the operation of the mother-
board, jumpers can be used to choose
between optional settings. Jumpers
create shorts between two pins to
change the function of the connector.
Pin 1 is identifi ed with a square solder
pad on the printed circuit board. See
the motherboard layout pages for
jumper locations.
Note: On two pin jumpers, "Closed"
means the jumper is on and
"Open" means the jumper is off
the pins.
GLAN Enable/Disable
Both JPL1 and JPL2 enable or dis-
able the GLAN Port on the mother-
board. See the table on the right for
jumper settings. The default setting
is enabled.
GLAN Enable
Pin# Defi nition
1-2 Enabled (*default)
2-3 Disabled
A. GLAN Port1 Enable
B. GLAN Port 2 Enable
B
A